A successful bathroom renovation starts long before the first tile is installed.
It’s easy to get excited about choosing a new vanity, beautiful shower fixtures or the perfect bathtub. But the decisions you make during the planning stage can have just as much impact on the finished result.
Here are 15 important things to check before ordering products or starting construction.
1. Measure Everything Before Ordering
Don’t rely on rough measurements or assumptions.
Measure wall widths, room dimensions, ceiling heights, doorways and available clearances.
Remember to account for baseboards, trim and any unusual wall conditions.
2. Measure the Route Into Your Home
Your new vanity or bathtub needs to make it into the house.
Check entry doors, hallways, staircases, corners and bathroom doorways.
Large glass panels, countertops and furniture can be surprisingly difficult to maneuver.
3. Check Plumbing Before Choosing a Vanity
The location of your existing plumbing can affect your vanity selection.
Consider the sink position, drawer configuration and available cabinet space.
Make sure the vanity and plumbing will work together before placing an order.
4. Choose Your Shower Base Carefully
Shower bases aren’t interchangeable simply because they have the same overall dimensions.
Check the drain location, installation method, threshold height and compatibility with your selected wall system and enclosure.
5. Confirm Shower System Compatibility
Before purchasing shower fixtures, make sure all the components are compatible.
Verify the valve requirements, trim compatibility, flow requirements and which components are included in the package.
Not every shower trim kit works with every valve.
6. Plan Your Shower Glass
Shower glass needs to suit the actual finished opening.
Wall conditions, finished tile dimensions, shower base or curb measurements and door clearance all matter.
Final measurements are often best taken after the relevant surfaces have been installed.
7. Plan Your Shower Floor Drainage
Shower floors need the correct slope toward the drain.
Poor drainage planning can result in low spots and standing water.
Discuss the drain location and floor construction with your contractor before installation.
8. Waterproof the Entire Shower Correctly
A tiled shower isn’t automatically waterproof.
The waterproofing system needs to be properly installed around corners, seams, penetrations, niches and drains.
Follow the selected system’s installation requirements carefully.
9. Plan Your Shower Niche Early
Don’t leave niche placement until the tile installer is ready to start.
Decide on the location, size and height based on your everyday products.
Also consider how the niche will fit into the waterproofing system and tile layout.
10. Check Door and Drawer Clearance
A bathroom layout can look spacious until you open everything.
Check that:
- Vanity drawers can open fully.
- Cabinet doors don’t hit other fixtures.
- Shower doors have enough clearance.
- The bathroom entry door doesn’t interfere with the vanity or toilet.
11. Plan Accessory Locations Before Tiling
Towel bars, hooks, toilet paper holders and shower accessories should all be considered before the walls are finished.
This is particularly important when accessories need to be anchored through tile.
12. Coordinate Your Mirror, Faucet and Lighting
These three elements need to work together.
Check the mirror dimensions, faucet height, backsplash and light placement before purchasing.
You don’t want to discover that your new mirror doesn’t fit between the faucet and lighting fixtures.
13. Plan Your Flooring Transitions
Think about how the bathroom floor will meet the flooring in the adjoining room.
Finished floor heights, thresholds and transitions should be coordinated so the final result looks intentional and doesn’t create an awkward edge.
14. Think About Future Needs
Even if you don’t need certain features today, consider whether you may want them later.
Examples include:
- Electrical provisions for a bidet or washlet.
- Wall reinforcement for future grab bars.
- Additional storage.
- A handheld showerhead.
- More convenient lighting.
Some small planning decisions can make future upgrades easier.
15. Confirm What’s Included With Every Product
Before ordering, confirm the dimensions, finishes, included components, installation requirements and warranty details.
Don’t assume that a product photo shows everything included in the purchase.
Check whether items such as faucets, drains, handles, shower valves and toilet seats are sold separately.
The Bottom Line
The more planning you do before construction begins, the fewer surprises you’re likely to encounter.
At Vanity Mart, we help homeowners explore and coordinate the products needed for bathroom renovations, from vanities and faucets to toilets, bathtubs, shower kits, glass enclosures, tile and flooring.
Whether you’re planning a complete bathroom update or simply replacing a few key fixtures, visit our Waterloo showroom and let us help you get started.